How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to add a second key. This requires the use of a handheld computer called Tech-2 which is used by the dealer. Then it is necessary to purchase a new transponder. key are required to be purchased.
It is a good idea to rotate your keys in order that one doesn't wear out more quickly than the other. This will also ensure that your keys remain in good condition.
Replacement Case
Unlike the classic Saab keys of the past keys, the modern key fobs have electronics inside which makes it hard to duplicate. This has made car theft much more difficult than it was twenty years ago. However, it also has made replacing lost keys a much more costly endeavor.
Every owner of a 9-3 Saab should have at least two working keys. If one gets lost, it costs a lot of money to purchase a new one for the vehicle because it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100 and $200 for this.
There are several ways to get around these high cost. Some parts dealers can look up the code from an old key (usually the same one that opens the doors and turns the ignition) and cut a brand new metal key blade at just a fraction of dealer cost. The key must, however, be identical to the original to work correctly within your car.
Follow these steps to replace the case. You'll need a flathead screwdriver as well as some patience. Utilizing the screwdriver, slowly break the plastic and separate the emergency keys from the case. Once you have the case open, take the electronics out and place them inside your new case. Make sure you insert the correct badge and key back inside the case, too.
Replacement Battery
The Saab 9-3 replacement battery is a cheap part that can be quickly and easily replaced. This YouTube video from Cyclone Cyd demonstrates how you can replace the battery of the remote fob with only four steps. This tutorial is suitable for any modern saab key fob, however the procedure might differ slightly.
The first step is to find the button that lets off the backup key inside the fob. This button is usually located near the Saab logo on the back of the fob. Next take the flathead screwdriver to insert into the small hole of this button. This should be enough to allow you to open the fob case in order to change the battery.
Once you have installed the new CR1632 batteries, you can reassemble your remote key fob. Then, you can program it into your car. The entire process should not take more than an hour or less. It's a very easy procedure that doesn't require any special equipment.
The process is more complicated if you lose your key, but it's possible. The dealer must verify the VIN of the car, and then order a replacement key blade and TWICE module that has the correct unique code. lost saab key The Keylab will then need to program the key using MDI an innovative software tool.
Replacement Key Fob
The key fob is the device that locks and unlocks your car, it's got a battery inside. The batteries last for a period of that is a long time, and they eventually fail. It's a common issue in all vehicles. The good thing is that you can replace the battery on most key fobs, without having to replace the entire case. You can buy replacement fobs from Amazon that come with all the electronics already installed, so you'll be able to just pop open the case and replace the batteries that were in the case. It is necessary to remove the emergency key before you can replace the batteries. To do this, you need to insert an small screwdriver with a flat head into the slot in the middle. The case will split once you rotate the screwdriver around it.
If you're looking to replace your keys, have a spare in your possession. This can save you a lot of money. If you have a spare, you can ask the dealer cut an additional key and program it to your car, which is much cheaper than replacing the whole key fob.
It is possible to add another key to your car even if you don't have one, but it takes some research and effort. The cost for adding a second key is several hundred dollars and it also requires programming of the car's computer. This can be done by a professional, however it's a costly choice for the majority of owners.
Replacement Ignition
The latest SAAB 9-3 has an alarm system that is more sophisticated built on a keycode. If you lose your only key, it could be costly to replace it with another one since the car needs to have a special computer added and also be programmed to accept a new key. Dealers can even charge hundreds of dollars to program an entirely new key, in the event that they are unable to do it.
If you've lost the only working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) to create a replacement, and they will charge top dollar for it. Instead we can reprogram the EEPROM of your current car computer to prepare it to accept a second key, which will save you more than 50% of the amount you have to pay at a dealership.
If you have owned a SAAB 9-3 a long time, you know that the ignition keys aren't very durable. They can be extremely sticky, and the buttons can be removed from them at times and you should think about buying a new one if the one you have isn't working properly. It's not as difficult as it appears to replace the ignition key. With the proper tools, it can be accomplished in a matter of minutes.